Download Navy BECC MOD 1 Test Questions and Answers and more Exams Marine Engineering in PDF only on Docsity!
BECC MOD 1 TEST QUESTIONS AND
ANSWERS ALREADY PASSED
What ARE 3 considerations when dealing with electrical burns? ✔✔Electrical current may burn a large area just below the surface
Perform CPR if needed
Treatment is the same as for a thermal burn
(True/False) Section 300 of the PQS book list infrequent task and abnormal conditions. ✔✔TRUE
The overall purpose of PQS is to ...... ✔✔provide a means to qualify ships personnel.
(True/False) PQS provides an effective way to monitor an individual's qualification progress. ✔✔TRUE
When can your Final Qualification Page be signed?. ✔✔After all line items have been completed and signed
Vocabulary used in each qualification can be found in the ....... Section of the PQS book. ✔✔FUNDAMENTALS
Progress and completed qualifications of each person in the division are displayed on/in the ....... ✔✔PROGRESS CHART
Who is the final qualification authority? ✔✔COMMANDING OFFICER
A five inch outside micrometer will measure objects that are ....... inches thick. ✔✔ 4 - 5IN
A Dial indicator may be used to....... ✔✔ALIGN MACHINERY
It is NOT safe to operate electrical power tools in areas where ....... is/are present. ✔✔FLAMMABLE GASES
Electrical power tools must be inspected prior to issue by a qualified ....... ✔✔ELECTRICIAN
A torque wrench is used to measure the tightness of ... ✔✔FASTENERS
Which of the following serves as the "Table of Contents" for the Work Center PMS manual? ✔✔LIST OF EFFECTIVE PAGES (LOEP)
The SYSCOM Control Number assigned for each maintenance requirement listed in a MIP must match the number on the corresponding ✔✔MRC (maintenance requirement card)
Materials needed to perform the required maintenance are found on the ✔✔FRONT OF THE MRC
The responsibility to replace a missing MRC belongs to the ....... ✔✔WORK CENTER SUPERVISOR
Who assists the Department Head in managing maintenance at the division level? ✔✔DIVISION OFFICER
Who has the responsibility to maintain the list of effective pages? ✔✔WORK CENTER SUPERVISOR
Which schedule is NOT used in the 3M system? ✔✔DAILY
Which of the following periodicity code is used when a maintenance requirement is performed monthly? ✔✔M
Which document is use to verify that you have the proper MRC? ✔✔MIP (MAINTENANCE INDEX PAGE)
You must check the ...... to ensure that the weekly schedule is correct. ✔✔QUARTELY SCHEDULE
Material needed to perform a specific PMS action is listed on the ...... ✔✔MRC (MAINTENANCE REQUIREMENT CARD)
The maintenance procedure steps on the MRC are ✔✔TO BE FOLLOWED PRECISELY
The shipboard hazardous material list is provided ...... on the Department of Defense's CDROM. ✔✔QUARTERLY
Requirements for storage of hazardous material are found on the ...... ✔✔MSDS
What type of activity consists of non-crew members involved in the construction or maintenance of the ship? ✔✔REPAIR ACTIVITY
The Instrument Log is a sequential listing of all labels issued for ....... and ....... instruments. ✔✔OUT OF COMMISION., OUT OF CALIBRATION
All "Cleared" Danger/Caution tag-out Record Sheets are filed in section five until ....... ✔✔THE NEXT TAG OUT AUDIT
(True/False) The second person signing the tags may accompany the person attaching the tags? ✔✔FALSE
Who may authorize hanging of tags and labels? ✔✔AUTHORIZING OFFICER
When hanging tags on a specific valve, the tag should be posted on the ....... ✔✔VALVE OPERATOR
At what level of continuous noise, is single hearing protection required? ✔✔84 DB
In the Hearing Conservation Program, physical exclusion is referred to as ✔✔AUDITORY REST
An example of a noise hazard requiring only single hearing protection would be a ....... at ....... dB. ✔✔PAINT CHIPPER AT 100DB'S
What is used to treat the sick or injured until competent medical care is available? ✔✔FIRST AID
The objectives of first aid are save lives, ✔✔PREVENT FURTHER INJURY, LIMIT INFECTION
(True/False) Keep the victim lying down with their head elevated until the type and seriousness of the injury is determined. ✔✔FALSE
A chest injury victim that has breathing difficulties should be placed on/in ✔✔SITTING OR SEMI-SITTING POSITION
When conducting first aid on a burn victim ...... ✔✔USE MINIMUM TREATMENT
The Scott Emergency Escape Breathing Device can be donned and activated in ....... seconds. ✔✔30 SECONDS
Which Emergency Escape Breathing Device will operate for approximately fifteen minutes? ✔✔SCOTT
The Scott EEBD device is operated by ...... ✔✔A PULL PIN MECHANISM
On the Ocenco Emergency Escape Breathing Device, which component acts as an Air reservoir that receives oxygen from the oxygen regulator and exhaled air from the scrubber? ✔✔BREATHING BAG
-Section 1 of the Tag-out log contains the Tag-Out User's Manual and other amplifying instructions for administering the tag out process. This section also contains the list of Authorizing Officers. -Section 2 the Danger/Caution Tag-Out Index and Record of Audits - Commonly referred to as the Tag-out Index sheet, the form provides a ready reference of existing tag-outs, while ensuring the sequential issuing of tag-out serial numbers for all tag-outs issued. It is also used by the Authorizing Officer to record the results of tag-out program audits. -Section 3 active Tag-Out Record Sheets (TORS) - The TORS are used to list all the tags associated with the tag-out of a specific system or component. It is also used to record discrepancies (including
corrective actions) found during the audit of the particular tag-out action. Section 4 Instrument Log - It has a sequential listing of all the labels for Out-of-Commission an ✔✔
what are the two basic types of maintenance in the navy? ✔✔PREVENTATIVE AND CORRECTIVE
PQS SECTION
300- ✔✔100-FUNDAMENTALS
200-SYSTEMS
300-WATCHSTATIONS
WHAT IS THE NUMERICAL CODE FOR THE "WORK CENTER PMS MANUAL"?
✔✔43P
WHO IS RESPONSIBLE FOR PROPERLY MANAGING THE 3M SYSTEM?
✔✔EXECUTIVE OFFICER (XO)
